Crosby G209 - Screw Pin Anchor Shackle

About the Crosby G209 - Screw Pin Anchor Shackle: G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271F Type IVA, Grade A, Class 2, Capacities 1/3 thru 55 metric tonnes, grade 6. Forged - Quenched and Tempered, with alloy pins. Working Load Limit and grade “6” permanently shown on every shackle. Hot Dip galvanized or Self Colored. Fatigue rated. Shackles 25t and larger are RFID EQUIPPED. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order. Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F). Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules (31 ft. Ibs.) at -20 degree C (-4 degree F). Sizes 1/2t-25t meet the performance requirements of EN13889:2003. All requirements of ASME B30.26 are met or even exceeded by the Crosby G209 - Screw Pin Anchor Shackle. Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes. Crosby has Type Approved to provide 2t through 25t 209 anchor shackles that meet the requirements of DNV Certification Notes 2.7-1 - Offshore Containers. These Crosby shackles (met by our current standardproducts) are: statistical proof test of 1% to 3%, based on lot size is required. Impact test of shackle bow and pin are provided. The tests are conducted by Crosby and we provide a 3.1 test certificate upon request, with test results. Look for the Red Pin® . . . the mark of genuine Crosby quality. Feel free to contact us for more information on this product

Crosby G209A Alloy Screw Pin Anchor Shackle | Cpacity of 2t - 21t

About the Crosby G209A Alloy Screw Pin Anchor Shackle: Crosby G209A Alloy Screw Pin Anchor Shackle Crosby G209A Alloy Screw Pin Anchor Shackle meets the performance requirements of Federal Specification RR-C-271F Type IVA, Grade B, Class 2 Capacities 2 thru 21 metric tons. Meets performance requirements of Grade 8 shackles. Forged Alloy Steel – Quenched and Tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Hot Dip Galvanized. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order. Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F). Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. More about Crosby

Crosby S209T Theatrical Shackle

About the Crosby S209T Theatrical Shackle: Sizes: 3/8” through 3/4” Capacities: 1 through 4-3/4 metric tonnes. Forged - Quenched and Tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Flat black baked on power coat finish. Fatigue Rated. Industry leading 6 to 1 design factor. Screw pin anchor shackles meet the performance requirement of Federal Specification RR-C-271F Type A, Grade A, Class 2, except for those provisions required of the contractor. Meets the performance requirements of EN 13889:2003. Crosby S209T Theatrical Shackle meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties Crosby

Crosby G2130 Bolt Type Anchor Shackle

About the Crosby G2130 Bolt Type Anchor Shackle The Crosby G2130 Bolt Type Anchor Shackle with thin head bolt-nut with cotter pin meets the performance requirements of Federal Specification RR-C-271F Type IVA, Grade A, Class 3. Features of the Crosby G2130 Bolt Type Anchor Shackle: Capacities 1/3 - 150 metric tonnes, grade 6. Working Load Limit and grade “6” permanently shown on every shackle. Forged — Quenched and Tempered, with alloy pins. Hot Dip galvanized or Self Colored. (85, 120, and 150-metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red) Fatigue rated (1/3t - 55t). Shackles 25t and larger are RFID EQUIPPED. Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F). 3.25t through 25t bow and bolt are Certified to meet charpy impact testing of 42 joules (31 ft-Ibs.) min. ave. at -20 degree C (-4 degree F) Meets or exceeds all requirements of ASME B30.26. Sizes 1/3.25t-25t meet the performance requirements of EN13889:2003. Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order. Shackles 120 metric tons and larger are proof tested, Magnetic Particle Inspected and provided. Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes. 3.1 Certification as standard available for charpy and statistical proof test for pg 79 only up to 25 tons to DNV2.7-1 and EN13889. Crosby 3.25t through 25t G2130 anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested. The tests are conducted by Crosby and 3.1 test certification is available upon request. Refer to page 76 for Crosby COLD TUFF® shackles that meet the additional requirements of DNV rules for certification of lifting applications - Loose Gear. All other 2130 and all 2150 shackles can meet charpy requirements of 42 joules (31 ft-Lbs) avg at -20 degree C (-4 degree F) upon special request. Look for the Red Pin® . . . the mark of genuine Crosby quality. For more information on Crosby lifting products, click here.

Crosby G2130A Bolt Type Anchor Shackle (Grade 80) | Capacity from 2t - 17t

About the Crosby G2130A Bolt Type Anchor Shackle Grade 80: The Crosby G2130A Bolt Type Anchor Shackle with thin head bolt-nut and cotter pin meets the performance requirements of Federal Specification RR-C-271F Type IVA, Grade B, Class 3. Capacities 2 to 17 metric tonnes. Working Load Limit permanently shown on every shackle. Forged Alloy Steel – Quenched and Tempered, with bow and bolt. Hot Dip galvanised. Shackles can be RFID EQUIPPED. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order. Type Approval and certification in accordance with DNV Type Approval under DNV 2.7-1. Shackles are Quenched and Tempered and meets DNV impact requirements of 42 joules (31 ft. Ibs.) at -40 degree C (-40 degree F). Find out more about Crosby lifting and handling products.

Crosby G2130CT and G2140CT Cold Tuff Anchor Shackle

About the Crosby G-2130CT and G-2140CT Cold Tuff Anchor Shackle: G-2130CT Cold Tuff Bolt Type Anchor Shackle. Bolt Type Anchor shackle with thin head bolt - nut with cotter pin. Meets the performance requirements of Federal Specification RR-C-271F Type IVA, Grade A, Class 3 G-2140CT Cold Tuff Anchor Shackle meets the performance requirements of Federal Specifications RR-C-271F, Type IVA, Grade B, Class 3 Forged - Quenched and Tempered, with alloy bolt. G-2130CT - Carbon Steel G-2140CT - Alloy Steel Working Load Limit permanently shown on every shackle. Individually Serialized with Certification. Fatigue Rated (G-2130CT only). Shackles 25t and larger are RFID EQUIPPED. All sizes are individually proof tested to 2.0 times the Working Load Limit. Finish is Inorganic Zinc Primer or Hot Dipped Galvanized. Bow and Bolt are Certified to meet charpy impact testing of 42 joules (31ft-Ibs.) min. ave. at -20 degree C (-4 degree F). Individually Mag Inspected with certification. Type Approval and certification in accordance with DNV 2.7-1 Offshore Containers, and Rules for Certification of Lifting Appliances, DNV OS-101 and are produced in accordance with DNV MSA requirements, including required documents. COLD TUFF® shackles are suitable for use to -50° F. Refer to page 161 for COLD TUFF® Master Links and Master Link assemblies. ***For 150t, 175t, 200t and 250t options please contact us for price and availability Please Contact us to receive a quotation on the Cold Tuff Anchor Shackle: [fusion_builder_container hundred_percent="yes" overflow="visible"][fusion_builder_row][fusion_builder_column type="1_1" background_position="left top" background_color="" border_size="" border_color="" border_style="solid" spacing="yes" background_image="" background_repeat="no-repeat" padding="" margin_top="0px" margin_bottom="0px" class="" id="" animation_type="" animation_speed="0.3" animation_direction="left" hide_on_mobile="no" center_content="no" min_height="none"][gravityform id="1" title="true" description="true"][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Crosby G2160 Wide Body Shackle

About the Crosby G2160 Wide Body Shackle: • All sizes Quenched and Tempered for maximum strength. • Forged alloy steel from 7 thru 300 metric tons. • Cast alloy steel from 400 thru 1550 metric tons. • Proof tested as follows: • 7 thru 75 metric tons and 200 thru 300 metric tons: 2 x WLL. • 125 metric tons: 1.6 x WLL. • 400 metric tons and higher: 1.33 x WLL. • All ratings are in metric tons, embossed on side of bow. • G-2160, (7 thru 55t), are Hot Dip Galvanized and pins are painted red. • G-2160, (75t and larger), bows are furnished Dimetcoted, and pins are Dimetcoted, then painted red. • S-2160 bows and pins are painted red. • Shackles, 30t and larger, are RFID EQUIPPED. • Can be used to connect Synthetic Web Slings, Synthetic Round Slings or Wire Rope Slings. • Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble. • Increases usable sling strength minimum of 15% and greatly improves life of wire rope slings. • Approved for use at -40 degrees C (-40 degrees F) to 204 degrees C (400 degrees F). • Bow and bolt are certified to meet charpy impact testing of 42 joules (31 ft-lbs.) min. avg. at -20 degree C (-4 degree F). • All 2160 shackles are individually proof tested and magnetic particle inspected. Crosby certification available at time of order. • Shackles requiring ABS, Lloyds and other certifications are available upon special request and must be specified at time of order. • Type approved and certification to DNV Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements. Databook is provided that includes required documents. • Serialization / Identification • Material Testing (Physical / Chemical / Charpy) • Proof Testing • Look for the Red Pin® . . . the mark of genuine Crosby quality. ***For 75t through to 1550t options please contact us for price and availability Please Contact us to receive a quotation on the Crosby G2160 Wide Body Shackle: [fusion_builder_container hundred_percent="yes" overflow="visible"][fusion_builder_row][fusion_builder_column type="1_1" background_position="left top" background_color="" border_size="" border_color="" border_style="solid" spacing="yes" background_image="" background_repeat="no-repeat" padding="" margin_top="0px" margin_bottom="0px" class="" id="" animation_type="" animation_speed="0.3" animation_direction="left" hide_on_mobile="no" center_content="no" min_height="none"][gravityform id="1" title="true" description="true"][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Crosby G2169 Wide Body Shackle - Screw Pin

About the Crosby G2169 Wide Body Shackle - Screw Pin: The Crosby G2169 Wide Body Shackle - Screw Pin can handle high weights ranging from 7 - 18 metric tonnes. The shackles are quenched and tempered to ensure maximum strength and are forged from alloy steel. Full feature list of the Crosby G2169 Wide Body Shackle with Screw Pin: Capacities of 7, 12.5 and 18 metric tonnes. Quenched and Tempered for maximum strength. Forged Alloy Steel. Available in galvanised and self coloured finished. Individually proof tested and magnetic particle inspected. Crosby certification available at time of order. Meets or exceeds all requirements of ASME B30.26 Meets identification, ductility, design factor, proof load and temperature requirements. These shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Look for the Red Pin® . . . the mark of genuine Crosby quality. Please contact us for more information on this product

Crosby G2170 Grommet Shackle

About the Crosby G2170 Grommet Shackle: All sizes Quenched and Tempered for maximum strength. All sizes cast alloy steel. Sizes 300 metric tons and smaller are proof tested to 2 times the Working Load Limit. All ratings are in metric tons, embossed on side of bow. G-2170 bows are furnished Dimetcoted and pins are Dimetcoted, then painted red. All sizes are RFID Equipped in bow and pin Designed for use with single or double large diameter grommets. Extra large sling contact area improves efficiency of the grommet sling. Shackles utilize new Crosby Easy-Loc bolt system Large machined flat on ears that can be drilled and tapped for adapting other accessories. HR-1000 Hoist Ring in Bow available for easy transporting Provides a bearing surface that is at least 5 times that of a round shackle. Increases usable sling strength minimum of 60% and greatly improves life of grommet slings. Bow and bolt are certified to meet charpy impact testing of 42 joules (31 ftlbs.) min. ave. at -20 degree C (-4 degree F). All 2170 shackles are individually proof tested and magnetic particle inspected. Crosby certification available at time of order. Shackles requiring ABS, Lloyds, and other certifications are available upon special request and must be specified at time of order. All 2170 shackles can meet requirements of DNV Standard for Certification of Lifting Appliances upon special request and must be specified at time of order. Serialization / Identification Material Testing (Physical / Chemical / Charpy) Proof Testing Look for the Red Pin®….the mark of genuine Crosby quality. ***Please contact us for prices and availability Please Contact us to receive a quotation on the Crosby G2170 Grommet Shackle: [fusion_builder_container hundred_percent="yes" overflow="visible"][fusion_builder_row][fusion_builder_column type="1_1" background_position="left top" background_color="" border_size="" border_color="" border_style="solid" spacing="yes" background_image="" background_repeat="no-repeat" padding="" margin_top="0px" margin_bottom="0px" class="" id="" animation_type="" animation_speed="0.3" animation_direction="left" hide_on_mobile="no" center_content="no" min_height="none"][gravityform id="1" title="true" description="true"][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Gunnebo 854 Standard Bow Shackle with Screw Pin

About the Gunnebo 854 Standard Bow Shackle with Screw Pin: DNV 2.7-1 Type-Approved, EN-13889 and U.S Fed. Spec. RR-C-271 They are made from High Tensile Carbon Steel, Quenched and tempered, Grade 6 All parts are hot dip galvanized, brown painted pins on top of galv. They have a Safety factor of 6:1. Documentation: Test certificate and traceable raw material / inspection certificate acc. EN 10204 - 3.1. Sizes from 2 - 25 tonnes can be supplied with DNV 2.7-1 Type Approval Certifi cation. Can handle temperatures from -20ºC to 200°C.

Gunnebo 855 Standard Bow Shackle with Safety Bolt

About the Gunnebo 855 Standard Bow Shackle with Safety Bolt: DNV 2.7-1 Type-Approved, EN-13889 and U.S Fed. Spec. RR-C-271 They are made from High Tensile Carbon Steel, Quenched and tempered, Grade 6 All parts are hot dip galvanized, brown painted pins on top of galv. They have a Safety factor of 6:1. Documentation: Test certificate and traceable raw material / inspection certificate acc. EN 10204 - 3.1. Sizes from 2 - 25 tonnes can be supplied with DNV 2.7-1 Type Approval Certifi cation. Can handle temperatures from -20ºC to 200°C.

Gunnebo 856 Arctic Bow Shackle with Safety Bolt

About the Gunnebo 856 Arctic Bow Shackle with Safety Bolt: DNV 2.7-1 Type-Approved, EN-13889 and U.S Fed. Spec. RR-C-271 They are made from special alloy Steel, Quenched and tempered, Grade 8 All parts are hot dip galvanized, brown colour marking Documentation: Test certificate and traceable 3.1 certificate on the bow and the bolt in finished condition. Can handle temperatures from -40ºC to 200°C.

Gunnebo 857 Heavy Duty Shackle

About the Gunnebo 857 Heavy Duty Shackle: Grade 8 material. Has a safety factor of 5:1. Documentation: Test certificate and traceable 3.1 certificate.

Gunnebo 858 Lifting Super Bow Shackle with Safety Bolt

About the Gunnebo 858 Lifting Super Bow Shackle with Safety Bolt: U.S Fed. Spec. RR-C-271 Type IVA Class 3, Grade B. They are made from high tensile steel, Quenched and tempered, Grade 8. All parts are hot dip galvanized, brown colour marking. Has a safety factor of 5:1. Documentation: Test certificate and traceable 3.1 certificate.

Gunnebo 859 Wide Body Sling Shackle

About the Gunnebo 859 Wide Body Sling Shackle: Has a safety factor of 5:1. Made from High Tensile Steel, Quenched and Tempered

Yoke Alloy Bow Safety Pin DA 808 Grade 8 Shackle

About the Yoke Alloy Bow Safety Pin DA 808 Grade 8 Shackle: The Yoke Alloy Bow Safety Pin DA 808 Grade 8 Shackle is hot dip galvanized and 20,000 cycle fatigue rated to 1.5 times the Working Load Limit (WLL) They have passed the Charpy test of 42 joules (31ft. lbs.) at -20 C All shackles are safety pin type Please contact us to receive more information or quotation for this product: [fusion_builder_container hundred_percent="yes" overflow="visible"][fusion_builder_row][fusion_builder_column type="1_1" background_position="left top" background_color="" border_size="" border_color="" border_style="solid" spacing="yes" background_image="" background_repeat="no-repeat" padding="" margin_top="0px" margin_bottom="0px" class="" id="" animation_type="" animation_speed="0.3" animation_direction="left" hide_on_mobile="no" center_content="no" min_height="none"][gravityform id="1" title="true" description="true"][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Forged Alloy Wide Body Shackle - Type 809 With Bolt Pin

About the Forged Alloy Wide Body Shackle With Bolt Pin: Forged Alloy Wide Body Shackles are made of forged alloy steel with an alloy pin Each shackle permanently displays the Working Load Limit (WLL) All shackles have a Batch Code which links to a Test Certificate and quality traceability 100% magnaflux crack detection during manufacturing and 20,000 cycle fatigue rated to 1.5 times Working Load Limit Please contact us to receive more information or quotation for this product: [fusion_builder_container hundred_percent="yes" overflow="visible"][fusion_builder_row][fusion_builder_column type="1_1" background_position="left top" background_color="" border_size="" border_color="" border_style="solid" spacing="yes" background_image="" background_repeat="no-repeat" padding="" margin_top="0px" margin_bottom="0px" class="" id="" animation_type="" animation_speed="0.3" animation_direction="left" hide_on_mobile="no" center_content="no" min_height="none"][gravityform id="1" title="true" description="true"][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Yoke Alloy Bow Safety Pin DA 838 Grade 6 Shackle

About the Yoke Alloy Bow Safety Pin DA 838 Grade 6 Shackle: The Yoke Alloy Bow Safety Pin DA 838 Grade 6 shackle is hot dip galvanized and 20,000 cycle fatigue rated to 1.5 times the Working Load Limit (WLL) They have passed the Charpy test of 42 joules (31ft. lbs.) at -20 C All shackles are safety pin type Please contact us to receive more information or quotation for this product: [fusion_builder_container hundred_percent="yes" overflow="visible"][fusion_builder_row][fusion_builder_column type="1_1" background_position="left top" background_color="" border_size="" border_color="" border_style="solid" spacing="yes" background_image="" background_repeat="no-repeat" padding="" margin_top="0px" margin_bottom="0px" class="" id="" animation_type="" animation_speed="0.3" animation_direction="left" hide_on_mobile="no" center_content="no" min_height="none"][gravityform id="1" title="true" description="true"][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Crosby G210 - Screw Pin Chain Shackle

About the Crosby G210 - Screw Pin Chain Shackle: G-210 Screw pin chain shackles meet the performance requirements of Federal Specification RR-C-271F Type IVB, Grade A, Class 2, Capacities 1/3 thru 55 metric tonnes, grade 6. Forged - Quenched and Tempered, with alloy pins. Working Load Limit and grade “6” permanently shown on every shackle. Hot Dip galvanized or Self Colored. Fatigue rated. Shackles 25t and larger are RFID EQUIPPED. The Crosby G210 - Screw Pin Chain Shackle can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order. Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F). Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules (31 ft. Ibs.) at -20 degree C (-4 degree F). Sizes 1/2t-25t meet the performance requirements of EN13889:2003. Meets or exceeds all requirements of ASME B30.26. Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes. Crosby has Type Approved to provide 2t through 25t 209 anchor shackles that meet the requirements of DNV Certification Notes 2.7-1 - Offshore Containers These Crosby shackles (met by our current standardproducts) are: statistical proof test of 1% to 3%, based on lot size is required. Impact test of shackle bow and pin are provided. The tests are conducted by Crosby and we provide a 3.1 test certificate upon request, with test results. Look for the Red Pin® . . . the mark of genuine Crosby quality. *Please contact us for the availability of this product

Crosby G2150 Bolt Type Chain Shackle

About the Crosby G2150 Bolt Type Chain Shackle The Crosby G2150 Bolt Type Chain Shackle features a thin hex head bolt-nut with cotter pin. Meets the performance requirements of Federal Specification RR-C-271F Type IVB, Grade A, Class 3. Capacities 1/3 thru 150 metric tonnes, grade 6. Working Load Limit and grade “6” permanently shown on every shackle. Forged — Quenched and Tempered, with alloy pins. Hot Dip galvanized or Self Colored. (85, 120, and 150-metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red). Fatigue rated (1/3t - 55t). Shackles 25t and larger are RFID EQUIPPED. Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F). 3.25t through 25t bow and bolt are Certified to meet charpy impact testing of 42 joules (31 ft-Ibs.) min. ave. at -20 degree C (-4 degree F). Meets or exceeds all requirements of ASME B30.26. Sizes 1/3.25t-25t meet the performance requirements of EN13889:2003. Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order. Shackles 120 metric tons and larger are proof tested, Magnetic Particle Inspected and provided. Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes. 3.1 Certification as standard available for charpy and statistical proof test for pg 79 only up to 25 tons to DNV2.7-1 and EN13889. Crosby 3.25t through 25t G2130 anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested. The tests are conducted by Crosby and 3.1 test certification is available upon request. Refer to page 76 for Crosby COLD TUFF® shackles that meet the additional requirements of DNV rules for certification of lifting applications - Loose Gear. All other 2130 and all 2150 shackles can meet charpy requirements of 42 joules (31 ft-Lbs) avg at -20 degree C (-4 degree F) upon special request. Look for the Red Pin® . . . the mark of genuine Crosby quality. Visit the Crosby website for more information on the Crosby G2150 Bolt Type Chain Shackle and all other Crosby lifting gear.