Crosby S320AN Eye Hook

Crosby S320AN Eye Hook

  • The most complete line of Eye hoist hooks.
    • Available in carbon steel and alloy steel.
    • Designed with a 5:1 Design Factor for (Carbon Steel); 4.5:1 Design Factor for 30t – 60t (Alloy
    • Eye hooks are load rated.
    • Proper design, careful forging and precision controlled quenched and tempering give maximum
    strength without excessive weight and bulk.
    • Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years
    after purchase of the original hook, latch assemblies can be added. (See pages 119 – 121)
    • Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical
    • Type Approval and certification in accordance with ABS 2007 Steel Vessel Rules 1-1-17.7, and
    ABS Guide for Certification of Cranes.
    • Hoist hooks incorporate two types of strategically placed markings forged into the product
    which address two (2) QUIC-CHECK® features:
    • Deformation Indicators and Angle Indicators (see following page for detailed definition).
    The following additional features have been incorporated in the new Crosby S-320N Eye Hoist
    Hooks. (Sizes 3/4 metric ton Carbon through 22 metric ton Alloy.)
    • Metric Rated at 5:1 Design Factor for (Carbon Steel); 5:1 Design Factor for 1t – 22t (Alloy Steel).
    • Can be proof tested to 2 times the working Load Limit.
    • Low profile hook tip.
    • New integrated latch (S-4320) meets the World class standard for lifting.
    • Heavy duty stamped latch interlocks with the hook tip.
    • High cycle, long life spring.
    • When secured with proper cotter pin through the hole in the tip of hook, meets the intent
    of OSHA Rule 1926.1431(g) and 1926.1501(g) for personnel hoisting.
    • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.

Please contact us to receive more information or quotation for this product:

Contact Form

  • This field is for validation purposes and should be left unchanged.