Hawk Lifting Will Design Swing Jibs with Capacities and Dimensions to Suit Your Requirement

Wall-mounted Jib crane PMS

Lightweight, twist-free steel girder construction with low headroom.  The boom is fitted with a bearing and a wall bracket for anchoring the crane to a concrete wall.

Scope of delivery:

The electrical system is equipped with a lockable mains switch, round-cable power supply with cable support pipes for booms up to 4000 mm, from 4500 mm upwards, the boom is equipped with a trailing cable power supply. Due to cable sag on low cranes, we recommend the use of festooned cables even on short booms.

Cranes are supplied with an operating manual and complete documentation, certified pre- and installation inspection certificates.

Mounting systems:

• Wall mounting, using threaded rods that go through the wall and that are bolted to the wall with counter plates and nuts.
• Pillar embracing with anchor bolts and wall bracket. Bracket plate max. 500 mm, anchor bolts (threaded rods) max. 1000 mm
• Alternative mounting systems upon request. Mounting supports and walls are the responsibility of the client.

Accessories:

• Slew stoppers (buffers) can be fitted in-situ for a pre-determined fixed slewing range.
• Slewing brake, to control the boom speed during slewing. Recommended for a boom length of > 5 m or a head room of > 4 m. This prevents uncontrolled movement of the boom.
• Locking device, to lock the boom in a fixed position.

Floor-mounted Jib crane PFM

Lightweight, twist-free steel girder construction with low headroom. Compact rotating head for ideal construction dimensions; access from above ensures easy assembly. The boom is fitted with a roller bearing, pillar made from reinforced Steel pipe.

Scope of delivery: 

Crane consisting of a pillar support and boom. The electrical system is equipped with a lockable mains switch, round-cable power supply with cable support pipes for booms up to 4000 mm, from 4500 mm upwards, the boom is equipped with a festooned cable power supply. Due to cable sag on low cranes, we recommend the use of festooned cables even on short booms. Cranes are supplied with an operating manual and complete documentation, certified pre- and installation inspection certificates.

Mounting systems:

•  Base flange with anchor bolts and template.
• Anchoring the base plate (welded) including mortar cartridges, anchor studs (complete with nuts, locknuts and washers.
• Anchoring the dowel base plate (bolted) including mortar cartridges, anchor studs (complete with nuts, locknuts and washers)
• Mobile unit for changeable location.

Accessories: 

• Slew stoppers (buffers) can be fitted in-situ for a pre-determined fixed slewing range.
• Slewing brake, to control the boom speed during slewing. Recommended for a boom length of > 5 m or a head room of > 4 m. This prevents uncontrolled movement of the boom.
• Locking device, to lock the boom in a fixed position.

Please contact us to discuss your individual requirements and we will ensure you receive the most competetive quotation.

Tel: 01709 300127 or email info@hawklifting.co.uk